Technical
FLOORING
The marquee has a suspended timber floor covered with green exhibition grade carpet.
CONSTRUCTION
Stands are constructed from timber framed plywood faced panels, and most are double sided. Single faced panels are used for the back walls of stands at the edges of the marquee.
All panels:
are painted off-white
are 2.2m high
measure 57mm (thickness)
Each stand is finished with a header board bearing your trading name, except for some double length and corner stands where this may not be possible.
The frontage measurement of each stand is always calculated to centres of the panels. When planning your display some tolerance should be allowed on either side.
FIXINGS
Batons are located vertically every 500 mm within each panel, and around the edges. Recommended fixings include:
double-sided Velcro
small screws
cup hooks
We recommend that free-standing shelving is secured to the panels where appropriate.
ELECTRICAL
Each stand is fitted with:
A 13 amp double power point with a load tolerance up to 3 KW or 3000 watts. A 16 amp fitting which provides up to 3.5 KW or 3500 watts is available on request
Track spot lighting with a minimum of 3 adjustable spot lights per stand. On larger stands the lighting may be suspended from the roof
Ceiling fans are installed in the marquee in warm weather
TABLE HIRE
Tables are available for hire if booked in advance. The dimensions are:
1830mm (l) x 690mm (w) x 760mm (h) i.e. 6’ (long) x 2’3” (wide) x 2’6” (high).
